Our KCB industrial gear pumps cover flow rates from 1.1 to 570 m³/h, with rated pressures from 0.33 to 1.45 MPa. We offer cast iron, stainless steel and copper alloy pump body options, with standard medium temperatures up to 80°C and customized configurations listed for temperatures up to 300°C.

We supply different industrial gear pump configurations for distributors, importers and industrial equipment manufacturers handling oil transfer, lubrication and other compatible liquid applications.

 
  • Precision Pump
    Thick liquids can create high flow resistance and make conventional transfer arrangements difficult to operate. Our High Viscosity Pump is designed for compatible oils, adhesives, resins,...
  • High Viscosity Pump
    Thick liquids can create high flow resistance and make conventional transfer arrangements difficult to operate. Our High Viscosity Pump is designed for compatible oils, adhesives, resins,...
  • Explosion Proof Pump
    Pump selection for a hazardous industrial location requires more than matching flow and pressure. The drive equipment and complete installation must satisfy the site's explosion-protection...
  • Self Priming Gear Pump
    At tanker connections, oil depots, and remote transfer points, reducing manual priming work can simplify routine pumping operations. Our Self Priming Gear Pump is designed for compatible...
  • High Temperature Oil Pump
    Hot-fluid circulation places particular demands on pump clearances, sealing materials, and bearing components. Our High Temperature Oil Pump is intended for transferring or circulating...
  • Food Processing Pump
    Moving ingredients between preparation tanks, processing vessels, and filling equipment requires a pump selected for both the product's consistency and the production line's connection layout. Our...
  • Stainless Gear Pump
    When liquid compatibility and corrosion resistance influence equipment selection, the pump's wetted materials need to be considered alongside its hydraulic requirements. Our Stainless Gear Pump is...
  • High Flow Oil Pump
    Large oil-transfer installations often need to move substantial volumes without dividing the duty among multiple small pumps. Our High Flow Oil Pump is intended for high-throughput transfer...
  • Lubrication Oil Pump
    In an industrial lubrication circuit, the pump must deliver oil at a rate suited to the machinery's lubrication requirements. Our Lubrication Oil Pump is intended for circulating and supplying...
  • Gear Oil Pump
    Our Gear Oil Pump is designed for transferring clean, particle-free oils in industrial supply and circulation systems. Typical duties include moving diesel, crude oil, lubricating oil, and other...
  • Mini Gear Pump
    A Mini Gear Pump is a compact and lightweight pump for small-scale fluid transfer applications. This gear pump has a small footprint for installation in tight spaces. The pump delivers precise and...
  • Manual Gear Pump
    A Manual Gear Pump is operated by hand for portable and emergency fluid transfer applications. This gear pump has a manual crank or handle that provides simple and reliable operation. The pump...
First 123 Last
 

KCB Gear Pump Specifications

The following specifications are published for our KCB gear pump series. Individual flow rates, pressures and configurations depend on the selected model.

Specification Available Range or Configuration
Flow Rate 1.1–570 m³/h
Rated Pressure 0.33–1.45 MPa
Standard Medium Temperature ≤80°C
Customized Medium Temperature Up to ≤300°C
Pump Body Materials Cast iron, stainless steel, copper alloy
Drive Options Direct motor drive, coupling drive
Rotational Speed 1,400–1,420 r/min
Pressure Protection Built-in safety valve

Compatible Liquid Applications

Our KCB gear pumps are designed for transferring lubricating oil, diesel, crude oil and other liquids that are non-corrosive and free of solid particles.

Typical applications include:

  • Industrial oil transfer systems
  • Machinery lubrication systems
  • Fuel transfer operations
  • Oil circulation and supply equipment

For corrosive liquids or liquids containing solid particles, the standard KCB configuration should not be assumed suitable. We also offer separately configured stainless steel and high-temperature gear pump products for different operating conditions.

Material and Configuration Options

We offer three pump body material options for KCB gear pumps:

Configuration Available Option
Pump Body Cast iron
Pump Body Stainless steel
Pump Body Copper alloy
Drive Configuration Direct motor drive or coupling drive
Pressure Protection Built-in safety valve

Material selection can be matched to the liquid and operating environment. The required material and sealing configuration should be confirmed against the specific pump model.

Other Gear Pump Configurations

For applications outside the standard KCB configuration, we provide the following separate gear pump products.

Product Type Published Specifications and Options
Stainless Steel Gear Pump 304 or 316L stainless steel; flow rate 1.5–450 m³/h; rated pressure 0.3–1.6 MPa; medium temperature -20°C to 180°C
High Temperature Gear Pump Heat-resistant cast iron or high-temperature stainless steel; flow rate 1.8–520 m³/h; rated pressure 0.35–1.8 MPa; temperature 180–350°C; optional air cooling system and explosion-proof high-temperature motor
Explosion Proof Gear Pump Published explosion-proof rating Exd II BT4; flow rate 1.5–420 m³/h; working pressure 0.35–1.6 MPa; medium temperature -10°C to 120°C
Sanitary Gear Pump Food-grade stainless steel construction; internal mirror polishing; food-grade heat-resistant seals; flow rate 2–260 m³/h; rated pressure 0.25–1.5 MPa; temperature ≤160°C; flange or sanitary quick-connect interfaces

These specifications belong to their respective product configurations and should not be treated as interchangeable KCB specifications.

Custom Gear Pump Manufacturing

We support customized gear pump production according to customer drawings. The published customization scope includes:

  • Flow rate and pressure requirements
  • Drive configuration
  • Pump body material
  • Connection dimensions

For high-temperature gear pumps, we also offer OEM/ODM production, private labeling, drawing-based manufacturing and sample-based manufacturing. The published minimum order quantity for this product is one unit.

Manufacturing and Quality Inspection

Our manufacturing and inspection capabilities include pump machining, assembly and testing.

Our KCB product information specifies comprehensive performance testing before shipment and allows third-party inspection.

Available inspection processes include:

  • Pressure testing
  • Sealing performance testing
  • Flow testing

We also provide product selection tables, technical specifications, drawings and performance curves for equipment procurement and project evaluation.

After-Sales and Technical Support

We provide a 12-month warranty after complete machine delivery and original spare parts supply.

Our published service arrangements include 24-hour technical support, a six-hour response target for routine issues, and a target of arranging on-site support within 48 hours for urgent cases.

Special technical proposals are generally provided in approximately seven working days, according to our published service information.

Request a Gear Pump Quotation

Send us your required flow rate, working pressure, liquid type, operating temperature, preferred material and order quantity. You can also send an existing pump specification, drawing or product photograph.

Our team will review your requirements and provide the corresponding gear pump model, available configuration and quotation.

With abundant experience, we are one of the most professional gear pump manufacturers and suppliers in China. Please feel free to buy high standard gear pump made in China here and get pricelist from our factory. All customized pumps are with high quality and competitive price.

High Precision Gear Pump, High Viscosity Gear Pump, KCB Gear Pump
Send Inquiry
Send Inquiry