High Viscosity Pump

High Viscosity Pump

Thick liquids can create high flow resistance and make conventional transfer arrangements difficult to operate. Our High Viscosity Pump is designed for compatible oils, adhesives, resins, coatings, asphalt-related materials, syrups, and selected pastes that require a suitable pumping chamber and controlled operating speed.
Share to
Send Inquiry
Description
Technical Parameters

Product Overview

Thick liquids can create high flow resistance and make conventional transfer arrangements difficult to operate. Our High Viscosity Pump is designed for compatible oils, adhesives, resins, coatings, asphalt-related materials, syrups, and selected pastes that require a suitable pumping chamber and controlled operating speed.

The enlarged gear chamber and wider flow passages are intended to accommodate viscous media while reducing the risk of blockage. A low-speed design and optimized axial clearance help manage operating resistance. Material selection should account for the liquid's viscosity, temperature, chemical properties, and any abrasive or adhesive characteristics.

8b8fbbbae33437eb7b5cf158eb03d62c

 

 

74c53f8e4aee56ab50bd8986ff78a6f1
a15cb7b35bc5d65aa0fa1f60ad30581e

Handling Thick Media

Wider flow passages: Help accommodate viscous liquids and reduce the likelihood of material accumulation.

Low-speed operation: Supports controlled transfer of thick media under suitable operating conditions.

Wear-resistant component options: Rotor and gear materials can be evaluated when the liquid has abrasive or adhesive properties.

Reversible operation assessment: Forward or reverse running may be considered for compatible configurations after checking the pump structure, seals, and drive arrangement.

 

The stated viscosity range should be evaluated together with the operating temperature. A material's viscosity can change substantially during heating or cooling, affecting startup, suction, and achievable flow.

Where Viscous Transfer Is Required

Potential uses include adhesive and resin production, asphalt handling, paint and coating manufacturing, oil and grease processing, and syrup or thick food-material transfer. The pump should be selected according to the actual fluid properties rather than the industry label alone.

OEM/ODM and Material Selection

We provide OEM/ODM manufacturing and drawing-based customization. Buyers can discuss body material, sealing arrangement, connection dimensions, and other model-specific requirements after providing the medium's properties. MOQ is one unit.

3
 

Specifications for Model Assessment

Parameter

Specification

Media Viscosity

500–500,000 cSt

Flow Rate

0.8–260 m³/h

Rated Pressure

0.4–2.0 MPa

Media Temperature

≤180°C

Pump Materials

Cast iron, 304 stainless steel, or 316L stainless steel

 

Testing and Technical Confirmation

 

 

Each pump is tested before shipment and undergoes 100% inspection before packing. Third-party inspection is accepted. We recommend confirming viscosity at operating temperature, startup conditions, and the required flow before the model is finalized.

 

FAQ

 

 

Q: 1: Can this pump transfer material with a viscosity of 500,000 cSt?

A: That value is the upper end of the stated viscosity range, not a guarantee at every flow rate or temperature. The actual duty must be evaluated against the model, pressure, and inlet conditions.

Q: 2: Can the pump operate in reverse?

A: Reverse operation may be possible for suitable configurations. The drive, seals, and pump construction must be checked before this operating mode is approved.

Hot Tags: high viscosity pump, China high viscosity pump manufacturers, suppliers, factory, gear pump molasses transfer, hydraulic gear pump unit, internal gear high viscosity pump, internal gear stainless steel pump, low noise hydraulic gear pump, Sanitary Gear Pump

Send Inquiry
Send Inquiry